Skip to main content

Shared Practice Inbox: Clients message the practice, your team answers

A guide to connecting your practice's shared secure message channel, choosing who can use it, and replying to clients as the practice.

Clients no longer have to guess which practitioner to message. With the Shared Practice Inbox, your practice gets its own secure message channel. Clients message the practice from their client portal, the message lands in a shared inbox, and anyone on your team with access can pick it up and answer as the practice. If someone is away, nothing waits in their personal inbox.


This article is for workspace owners and admins who set up the shared channel, and for team members who reply from it. Connecting the channel needs a workspace owner or admin. If you don't see a shared inbox, ask your workspace owner or admin to give you access.
​

Topics covered:


How it works

Each workspace gets one shared secure message channel. A workspace owner or admin connects it to an inbox once, and from then on your team answers from one shared queue.

A client messages the practice → the message lands in your shared inbox → a team member takes it with Assign to me and replies as the practice → Send & close moves it to Closed.

On Reply-only (48hr window), clients can only reply within 48 hours of your team's message, and the thread closes after that.

​


One secure channel for the whole practice

A workspace owner or admin connects the shared secure message channel to an inbox in a couple of clicks. It sits next to your connected email accounts and phone number, so every way a client reaches the practice ends up in the same place.

Already have an inbox? Add the secure message channel to it from the inbox's settings. In a team workspace the inbox has to be shared with your team (Everyone or Restricted access); a solo practitioner can add it to a Just me inbox.

  1. Go to Inbox, hover over the inbox name and click the gear icon to open its settings.

  2. Find the Connected channels panel and click Add channel below the list.

  3. In Connect channel, choose Secure message to add the shared channel to this inbox.
    ​


New inbox: name it, share it, done

This section is for workspace owners and admins. New inbox opens a short flow: name the inbox (for example "Front desk"), choose who can use it, and connect the secure message channel. In a team workspace a secure inbox is always shared, and it starts with Everyone as Responder (All), so you can begin right away. A solo practitioner can keep it as Just me.

  1. Go to Inbox, click the gear icon beside Compose, then select New inbox.

  2. Enter an Inbox name, and add a color or a description if you want one.

  3. Under Access permissions, choose Everyone in the workspace or Restricted (Only specific team members).

  4. Click Continue, then pick the secure message channel to connect it to the inbox.


​No conversations in your Inbox yet? Click Set up shared secure messaging on the Inbox page instead. It opens Name your inbox with the channel already connected, and you finish with Create inbox.
​

​Note: The shared secure message channel is free on every plan. Sharing an inbox with your team (Everyone or Restricted access) needs Plus or Advanced, including their trials. Other plans see an Upgrade prompt.


Clients message the practice from their portal

In the client portal, clients can choose your practice as a recipient when the channel is set to All clients (anytime). It shows under your workspace name with your logo. Their message starts a thread in your shared inbox, and replies come back from the practice. Clients never see which team member answered.

This is a client's side of a conversation about getting a copy of their invoice (i.e. receipt). Two team members answered him, and he sees one thread with Super Clinic.
​


​You decide who can start a conversation, with the client-contact setting in the channel's settings:

Setting

What it means

All clients (anytime)

Any client can start a message with your team at any time.

Reply-only (48hr window)

Clients can only reply to messages your team has sent, within 48 hours.

Can't initiate communication

Clients can't send your team a message at any time.

And decide when and if clients can initiate communication with you and your team via secure messaging.

  1. Open the inbox's settings and find the Connected channels panel.

  2. Click Edit beside the secure message channel to open Secure message settings.

  3. Choose All clients (anytime), Reply-only (48hr window) or Can't initiate communication.

  4. Click Save to apply the setting to messages sent to the practice.


​Important: A new channel starts on Reply-only (48hr window). Clients only see your practice as a recipient in their portal once you switch the channel to All clients (anytime).


Send as the practice, or as yourself

When you write a new secure message, the From picker lets you choose Send as the business (shared with your team) or Send as yourself. It starts on the practice. For email, the inbox's Send as settings set which address a reply goes out from by default.

  1. Click Compose on the Inbox page and start a new secure message.

  2. Open the From picker at the top of the new message.

  3. Choose Send as the business to share the thread with your team, or Send as yourself.
    ​


​Two settings for who can start a conversation. Each kind of message follows its own setting:

  • Client messaging preferences: messages you send as yourself. Set in Settings, then Workspace Settings, then the Communications tab, the same as before.

  • Shared secure messaging: messages sent as the practice. Shown on the same page, and changed from the channel in the inbox's settings.

The two are separate: you can keep personal messages on Reply-only while clients can message the practice any time. The practice setting has no "Assigned clients only" option, because the practice isn't assigned to clients, and a new channel starts on Reply-only rather than copying your workspace setting.


Sent by: everyone knows who replied

Inside your team, each practice message shows Sent by with the name of the person who wrote it and Seen once the client has read it. Colleagues can see who already answered, so no one replies twice. Clients only ever see the practice.

Here is the same conversation inside the practice. Jack passed Henry's request to Sam. Each reply shows who sent it and Seen once Henry has read it.
​


Assign, or Assign to me

Assign any practice conversation to a teammate or take it yourself with Assign to me. The Unassigned tab is the team's queue: anything there still needs someone to handle it.

  1. Open the conversation from the Unassigned tab of your shared inbox.

  2. Click Assign in the header above the conversation to open the list.

  3. Choose Assign to me or pick a teammate from All team members.

Mark's question is waiting in Unassigned. Nobody owns it yet.
​

​

Type a name in the search box to narrow the list.
​


Five inbox roles

Each person's role in an inbox sets what they can see and do there. Owners and admins set roles in the inbox's settings, under Inbox access.

Role

What they can do

Owner

Full control of the inbox.

Admin

View, reply and manage the inbox.

Responder (All)

View and reply to every conversation in the inbox.

Responder (Assigned)

View and reply to conversations assigned to them only.

Viewer

View only.

Responder (Assigned) gives a team member a focused queue of their own work. They see only the conversations assigned to them, the Unassigned tab is hidden for them, and they can't assign conversations or start new ones from the inbox.


Unread count for each inbox

Each inbox in the navigation shows its own unread count, and it updates live as messages come in and teammates read them. Read state is shared, so when one person reads a practice message it's read for the whole team.

Here two unread client messages show against the shared inbox, and on Inbox in the navigation.
​


Send & close

Reply and close a conversation in one step: click the arrow beside Send and choose Send & close. The conversation moves straight to Closed, so your Open list only holds what still needs an answer.
​


Search every inbox and folder

Search now covers every inbox you can see and every folder, Closed included. A conversation that was closed days ago is one search away.
​


Works on your phone

The shared inbox, assigning, Send as and the client portal practice thread all work on phone-sized screens too.

From left: the shared inbox, Harold's conversation, and the same conversation as Harold sees it in the client portal.
​


Nothing has changed for your existing inboxes

Personal inboxes, connected email accounts, direct secure messages between you and a client, and all your conversation history stay exactly as they were. The shared practice channel is something you choose to add.


FAQ

  1. Why can't my clients see the practice in their portal?

    The channel is on Reply-only (48hr window), where every new channel starts. Switch it to All clients (anytime) in the channel's settings.

  2. Why can't I switch a shared inbox back to Just me?

    This is a known limitation. If your workspace moves below the Plus plan, a shared inbox can't be switched back to Just me. Save shows Upgrade instead.

  3. Can I move the channel to another inbox?

    Not directly. Remove the channel, then add it to the new inbox. Earlier conversations stay where they were.

  4. Does this work for email and SMS too?

    Partly. Assign and inbox roles cover every channel in the inbox. Sent by, Seen and the client portal thread are for secure messages only.


Related articles:


Our team is here to help with any questions or concerns. Just open a conversation through the Help channel in your workspace.

Did this answer your question?